Gummibandfuß für Overlock part #620117896
specialty type: Overlock

Der Gummibandfuß kann gleichzeitig 6–12 mm breite Gummibänder führen, sie dehnen und annähen. Verwenden Sie ihn für Sport- und Freizeitkleidung, Wäsche und vieles mehr.
 
How to use:
  1. Set the overlock machine for the desired stitch.
  2. 2. Loosen the screw at the front of the Elastic Foot to release the tension on the roller. Insert the elastic into the foot.
  3. 3. Snap on the foot and pull the elastic until it reaches behind the foot.
  4. 4. Tighten the tension screw to stretch the elastic.
  5. 5. Turn the handwheel to sew the first few stitches to secure the elastic.
  6. 6. Place the fabric under the foot and sew both the elastic and the fabric together.
  7. 7. Check the stitch and adjust the tension if necessary.

 

Note: To adjust the stretch of the elastic:

• Turn the tension screw to the right for more stretch.
• Turn the screw to the left for less stretch.
• Be careful not to stretch the fabric while sewing.

Neuestes Zubehör