INSPIRA® Light & Soft Fuse-On Stabilizer part #-
specialty type: Optional Accessories

INSPIRA® Light & Soft Fuse-On is a fusible tricot, which provides permanent stability to delicate and hard-to-handle fabrics such as silk dupioni, taffeta, satin and stretchy knits. When applied to the wrong side of the fabric, it will give a firm foundation without affecting feel or hand.
 
Size Available:
Light & Soft Fuse-On 12”x5 yards (#620115296)
 

 

Locate Dealer
Best for these applications:
• Interlining of delicate fabrics, protective layer on the back garments for sensitive skin.
• Silk dupioni, taffeta, satin, rayon, fine gauge knits and fabrics with an open weave.

 

 

Directions for use:

For hooped embroidery:
  1. Cut a piece of INSPIRA® Light & Soft Fuse-On the same size as your pattern piece or fabric.
  2. Place the textured side of the INSPIRA® Light & Soft Fuse-On onto the wrong side of the fabric. Use a pressing cloth and a low to medium dry iron. Press, hold then lift iron (without sliding) until entire area is fused.
  3. Where necessary, hoop an additional stabilizer with the fabric. Select stabilizer type and weight based on design density and fabric type.
  4. Stitch the embroidery.
  5. Remove any excess additional stabilizer. INSPIRA® Light & Soft Fuse-On remains in the project.
 
For sewing and decorative stitching:
  1. Cut a piece of INSPIRA® Light & Soft Fuse-On the same size as your pattern piece or fabric.
  2. Place the textured side of the INSPIRA® Light & Soft Fuse-On onto the wrong side of the fabric. Use a pressing cloth and a low to medium dry iron. Press, hold then lift iron (without sliding) until entire area is fused.
  3. After stitching, INSPIRA® Light & Soft Fuse-On remains in the project.

latest accessories