INSPIRA® Stitch Point Cut-A-Way Stabilizer part #-
specialty type: Optional Accessories

INSPIRA® Stitch Point Cut-A-Way is a type of cut-a-way stabilizer that is made of fibers that have been melted together rather than through the process of chemical bonding. Its unique construction provides increased resistance to distortion. This stabilizer is ideal for designs with high density and small stitch details. It remains in the project to support the design after laundering and wearing. Use INSPIRA® Stitch Point Cut-A-Way stabilizer as a backing for heavy knits and unstable fabrics like denim, faux fur, etc.
 
Size Available:
Stitch Point Cut-A-Way. 12”x10 yards (620111596)
 
Locate Dealer
Best for these applications:
 
  • Embroideries with medium to high stitch counts on fabrics that are laundered frequently.
  • Sweatshirt fleece, medium weight wovens and knits, boiled wool, mohair, faux suede, suede, micro-fiber, faux fur and vinyl.
 

 

Directions for use:

  1. Cut a piece of INSPIRA® Stitch Point Cut-A-Way stabilizer large enough for the selected hoop (hoop dimension plus at least 1” on all four sides). Embroideries with high density may require a second layer of INSPIRA® Stitch Point Cut-A-Way stabilizer.
  2. Hoop INSPIRA® Stitch Point Cut-A-Way stabilizer and fabric without stretching the fabric as you hoop.
  3. Stitch the embroidery.
  4. Trim the excess stabilizer away as close to the outer edge as possible.
  5. Follow normal care instructions for washing and drying, according to fabric type. Press with an iron set on low only.

latest accessories