powerquilter™ p3

Register your machine

Calibrating the Screen

If your screen needs to be calibrated because when you touch it nothing happens take the following steps.

  1. Place the USB stick into your computer
  2. Download file (zipped file) to your computers desktop.
  3. Double click the file to unzip it, then copy the file to your USB Stick.
  4. Safely remove the USB stick from your computer after the file has downloaded
  5. Power on the quilting machine
  6. Plug the USB stick into the USB port located on the left side of the LCD screen
  7. The quilting machine will begin to read the file and it will start the calibration
  8. Follow the instructions on your screen to calibrate your screen.
  9. The quilting machine will restart, once the machine has booted back up the screen will be calibrated
  10. Once the calibration is complete the file will automatically be removed from the USB stick


Welcome video

Set up machine and encoders

Winding the Bobbin

Threading the Machine

Thread Tension

Computer Display Screen

How to maintain your machine