Heart Shaped Valentine's Bag
Posted by PFAFF®
Sewing Supplies
-
Pink Silk: 17 3/4” x 53 1/8”(45x135 cm)
-
Organza/Toile: Scrap pieces for appliqués
-
Batting: 11 7/8” x 19 6/8” (30x50 cm)
-
Tear-away stabilizer
-
Matching sewing thread
-
Embroidery thread
-
Yarn to create a tassel
-
Beads for shoulder strap
-
Strong, durable thread for shoulder strap
-
Snap fastener
-
Pattern template for heart shape (download as pdf)
Cut
Add 5/8 inch (1,5 cm) seam allowance to the pattern pieces.
Pink Silk:
1 piece 16”x16” (40x40 cm) for embroidery
3 pieces cut out using the heart pattern
Batting:
2 pieces cut out using the heart pattern
Embroider
-
Hoop stabilizer and pink silk.
-
Embellish the front piece with an embroidery design of your choice following the instructions given for that design (we have used design #1 from design collection 467, Fancy Fabric). When finished cut out the front piece using the heart pattern, adding a 5/8” (15 mm) seam alllowance.
Create a Tassel
-
Wind the yarn around a piece of thick paper. (4”x 6”/10x15 cm)
-
Tie a thread through one of the short ends, and cut the other end open.
-
Then wind a thread piece approximately 1/2” (1 cm) from one end. Trim the tassel.

Shoulder Strap
-
Cut a strong and durable thread about 40” (100 cm) long. Thread with beads to create a shoulder strap.
Sewing
-
Place a piece of lining right sides together with the embroidered piece of the bag. Place a piece of batting on the bottom. Pin all layers together.
-
Sew the pieces together between the markings along the upper edge as illustrated (use 5/8” (1,5 cm) seam allowance).
-
Trim the seam allowance and turn right side out.
-
Repeat with the back piece.

Sew the Bag
-
Place the tassel on the front piece with the tassel pointing inwards. Place the back piece on top of the front piece right sides together.
-
Pin and sew the bag together between the markings as illustrated.
-
Trim the seam allowance, overcast, and turn right side out.
TIP: Use a bias tape to give the inner seam a smooth and neat appearance.

-
Sew the shoulder strap to the bag, using a strong thread.
-
Sew a snap fastener inside at the top of the bag.
Heart Shape Pattern