This presser foot is suited for sewing welting between two layers of fabric.
Preparing the machine
-
Needle: Left or both left and right
-
Stitch type: Three-thread overlock or four-thread overlock
-
Stitch type: 2-5mm
-
Differential feed lever: Normal position
-
Upper knife: Working position
Sewing
-
Place fabric with right sides facing.
-
Place cording (piping) in between upper and lower fabrics and insert fabrics under cording foot with cording positioned in groove under foot.
-
Sew while guiding both cording (piping) and fabric.
Note: Cording (piping) using bias tape and cord can also be done with this foot.