1. Home
  2. Support
  3. Machine Manuals & Updates
  4. creative™ 1.5
Back to Support
creative™ 1.5
creative 1 5 Machine EmbroideryUnitwebb image
creative™ 1.5

For This Machine

Machine Updates

UPDATE VERSION: 0049 (2016-11-24)



  • Support to the Optional 100x100 Metal hoop 


NOTE: There are TWO versions of this update! One for machines with old cutting mechanism and one for machines with new cutting mechanism. See different links below.


All features from the previous versions are of course also included in this update.

Thank you for your feedback and ideas! Please continue to give us your suggestions; they are very helpful to make the best sewing and embroidery machine in the world.


  • Download PC Update for machines with serial number lower than 09062904441 (= machines with old cutting mechanism)
  • Download PC Update for machines with serial number equal or higher than 09062904441 (=machines with new cutting mechanism)



  • Download and unzip the update software. Only the update file (labled OP314049A.lof or OP314049B.lof depending on the version) should be directly loaded onto your USB embroidery stick. Save the file at the root level, do not place the file in any folder, and do not upload any folder onto the USB stick. 
  • Make sure you don’t have any older version of a .lof file on your stick.
  • Switch off your PFAFF® creative™ 1.5 sewing and embroidery machine. Connect the USB embroidery stick loaded with the new software version to the USB port on your machine.
  • While pressing and holding the needle up/down button and the reverse button, turn on your machine. Hold the buttons until the progress bar is shown on the display.
  • The new software will install automatically.
  • When the update is completed the machine will restart automatically. Check the software version number in the settings menu.