Fringy Leather Earrings
Inskickat av PFAFF®
Do you know someone who is really cool? Then you should make her these fringy earrings, just one seam and then you’re done!
You will need:
-
PFAFF® sewing machine
-
Non-Stick Foot for IDT™ System (Item no.820664096)
-
Turquoise leather or suede 3”x4” (7x10cm)
-
White leather or suede ¾”x3”(1.5x7cm)
-
Tear-a-way stabilizer
-
Rayon embroidery thread
-
Glue
-
Two hooks for earrings
Download: template for earring
How to do
-
Print and cut out the template for the earring.
-
Transfer the template to the leather and cut out two pieces.
-
Snap on the Non-Stick Foot for IDT™ System
-
Place stabilizer underneath the white leather strip and sew a row of your favorite decorative stitch.
Note: The opening in the Non-Stick Foot allow a 6mm stitch width, if your stitch is wider, adjust the stitch width. You can also try sewing with a regular presser foot using the IDT™ system for better feeding.
-
Remove the stabilizer and trim the leather strip to be just a little wider than the stitch.
-
Cut two pieces equally long as the width of the earring. Glue the decorated white leather pieces to the earring.
-
Use scissors to fringe the bottom section of the earring as shown.
-
Make a small hole in the top of each earring and insert a hook.

Enjoy your earrings!
Download Template

You might also like: